Back to all

Why Is My Check Engine Light On?

December 2, 2018

The Check Engine Light strikes fear into the hearts of some Austin drivers, and is totally ignored by just as many. Just what it means is a mystery to most people.


Let's get the urgency issues out of the way first. If your Check Engine light is flashing, that means that something is wrong that could cause engine damage. Naturally, you need to get that taken care of right away. If your check engine light is flashing, you shouldn't drive at high speeds, tow or haul heavy loads. Take it easy all the way to your Austin service center.

drive

If the light is glowing steadily, you should keep an eye on it for a day or two. If the light doesn't go off, schedule an appointment with your friendly and knowledgeable pros at Tuffy Tire & Auto Service Center Austin to get it checked out.

Some more information on how the Check Engine light works may be helpful for Austin drivers. Most of your engine functions are controlled by a computer, not surprisingly, called an engine control computer. The computer is able to adjust many engine parameters for environmental conditions, engine condition and even the way you drive.

In order to make these adjustments, the computer relies on a network of sensors to provide data. The computer knows the proper operating range for each sensor. When a sensor reading is out of range, the computer runs some tests and may turn on the vehicle's Check Engine light.

A simple example is a loose or missing gas cap. This may cause one of the sensors to read out of range. The computer doesn't know if it's a serious condition that caused the reading or just a loose gas cap, so it stores a trouble code and turns on the Check Engine light.

Now when you tighten up the gas cap, the sensor readings will be in the correct range. The computer will keep checking on the report for a day or two. Since a bad reading didn't come up again, it turns off the Check Engine light. The computer will also try to make adjustments to compensate for some readings. If it can do so, it'll then turn off the Check Engine light.

If the problem can't be resolved then the light will remain on, and you should get your vehicle looked at. Your friendly and knowledgeable pros at Tuffy Tire & Auto Service Center Austin will plug a scanner into the on-board diagnostic port and read the trouble code stored in the computer. The trouble code will give the technician a starting place as he diagnoses the cause of the problem.

 

Tuffy Tire & Auto Service Center Austin
1170 Anderson Mill Rd
Austin, Texas 78750
512-258-3400
http://www.tuffyaustin.com

More articles from Tuffy Austin

Fuel for Thought

April 21, 2024

If you're like most people and drive a gasoline-powered vehicle, you need to be up to speed on its fuel-related components. They're pretty basic: the fuel, the fuel filter and the fuel pump. The fuel's the easy part. You probably gas up your vehicle yourself and, if you're like most drivers, pr... More

Straight Ahead (Wheel Alignment)

April 14, 2024

If every road was straight and smooth, we wouldn't have to worry much about wheel alignment. But they're not, so we do. Hitting potholes or driving on rough pavement can knock your vehicle out of alignment and you'll notice it in one of several ways. Your steering wheel may not be centered when ... More

Tuffy Tire & Auto Service Center Austin Maintenance Tips: The Belt Goes On

April 7, 2024

All Austin service advisors know that without the alternator, the battery will go dead in a few miles. The serpentine belt may also run the pumps for both the power steering and power brakes. And on many vehicles, the serpentine belt powers the water pump. The water pump circulates coolant thro... More